|
Fiber Optic Modules
We offer quality fiber optic products, such as fiber optic modules, fiber optic converters and fiber optic
patch cables. Our prices are very competitive. If you are interested to get a Free Catalog
or a Quick Quote
, please
go to our short application.
Fiber Optic Module, 100Base-FX, ST connector
Allows connection over long distances between two buildings where electrical isolation is necessary!
The additional fiber optic module works in conjunction with our Fast Ethernet Switch below.
For establishing fiber cable links up to 2km Conforms to the IEEE 802.3u 100Base-FX and 802.3x full-duplex flow control standard
- 1 x 100Mbit/sec fiber port (ST connectors)
- 1 x Dip switch to select fiber port full-duplex or half-duplex
- LED indicators for TX, RX, Link and FDX/COL
- 3 year warranty
Fiber Optic Module, 100Base-FX, MT-RJ connector
Allows connection over long distances between two buildings where electrical isolation is necessary! The additional fiber optic module works in conjunction with our Fast Ethernet Switch below
.
- For establishing fiber cable links up to 2km
- Conforms to the IEEE 802.3u 100Base-FX and 802.3x full-duplex flow control standard
- 1 x 100Mbit/sec fiber port (MT-RJ connector)
- 1 x Dip switch to select fiber port full-duplex or half-duplex
- LED indicators for TX, RX, Link and FDX/COL
- 3 year warranty
Fast Ethernet Switch, 16 RJ45 Ports + 1 Fiber Port, Port, 10/100Base-TX
The flexible professional switch! Our 16 Port 10/100Base-TX N-Way Switch has 16 auto-sensing 10/100Base-TX RJ-45 ports, plus one
extension slot for an optional 100Base-FX fiber module which enables long-distance connection. The optional modules support SC/ST/MT-RJ connectors. However, the fiber port can be used to
connect to a remote site up to 2km (multi-mode) or 60km (single-mode) away. The Switch supports basic management function (console management). Console management
involves the administration of the switch via a direct connection to the RS-232 console port. The function of the console management includes Trunk setting, VLAN setting, etc.
- High performance non-blocking architecture
- 16 x auto-sensing 10/100Base-TX STP/UTP Ethernet ports
- 1 x console port on the front for VLAN and trunking configuration
- 1 x expansion slot for an optional 100Mbit/sec fiber Module
- Additional STP/UTP uplink port for cascading (shared via port 16)
- Half-duplex mode for back pressure and full-duplex for flow cotnrol
- Store and forward architecture
- 8KB entry MAC address table
- 512KB on-chip packet buffer sharing
- Power, Trunking, 10/100Mb, Link/Activity and Full-duplex/Collision LED indicators
- 19" standard rackmounted size
- 3 year warranty
|
